Improved Electrocatalytic Activity and Stability by Single Iridium Atoms on Iron-based Layered Double Hydroxides for Oxygen Evolution

Full understanding to the origin of the catalytic performance of a supported nanocatalyst from the points of view of both the active component and support is significant for the achievement of high performance. Herein, based on a model electrocatalyst of single-iridium-atom-doped iron (Fe)-based layered double hydroxides (LDH) for oxygen evolution reaction (OER), we reveal the first completed origin of the catalytic performance of such supported nanocatalysts. Specially, besides the activity enhancement of Ir sites by LDH support, the stability of surface Fe sites is enhanced by doped Ir sites: DFT calculation shows that the Ir sites can reduce the activity and enhance the stability of the nearby Fe sites; while further finite element simulations indicate, the stability enhancement of distant Fe sites could be attributed to the much low concentration of OER reactant (hydroxyl ions, OH⁻) around them induced by the much fast consumption of OH⁻ on highly active Ir sites. These new findings about the interaction between the main active components and supports are applicable in principle to other heterogeneous nanocatalysts and provide a completed understanding to the catalytic performance of heterogeneous nanocatalysts.     

Insight into Iron Leaching from an Ascorbate-Oxidase-like Fe−N−C Nanozyme and Oxygen Reduction Selectivity**

Ascorbate (H₂A) is a well-known antioxidant to protect cellular components from free radical damage and has also emerged as a pro-oxidant in cancer therapies. However, such “contradictory” mechanisms underlying H₂A oxidation are not well understood. Herein, we report Fe leaching during catalytic H₂A oxidation using an Fe−N−C nanozyme as a ferritin mimic and its influence on the selectivity of the oxygen reduction reaction (ORR). Owing to the heterogeneity, the Fe-N_x sites in Fe−N−C primarily catalyzed H₂A oxidation and 4 e⁻ ORR via an iron-oxo intermediate. Nonetheless, trace O₂⋅⁻ produced by marginal N−C sites through 2 e⁻ ORR accumulated and attacked Fe-N_x sites, leading to the linear leakage of unstable Fe ions up to 420 ppb when the H₂A concentration increased to 2 mM. As a result, a substantial fraction (ca. 40 %) of the N−C sites on Fe−N−C were activated, and a new 2+2 e⁻ ORR path was finally enabled, along with Fenton-type H₂A oxidation. Consequently, after Fe ions diffused into the bulk solution, the ORR at the N−C sites stopped at H₂O₂ production, which was the origin of the pro-oxidant effect of H₂A.     

A Strategy for Controlling the Polymerizations of Thiyl Radical Propagation by RAFT Agents

The ability to extend the polymerizations of thiyl radical propagation to be regulated by existing controlled methods would be highly desirable, yet remained very challenging to achieve because the thiyl radicals still cannot be reversibly controlled by these methods. In this article, we reported a novel strategy that could enable the radical ring-opening polymerization of macrocyclic allylic sulfides, wherein propagating specie is thiyl radical, to be controlled by reversible addition–fragmentation chain transfer (RAFT) agents. The key to the success of this strategy is the propagating thiyl radical can undergo desulfurization with isocyanide and generate a stabilized alkyl radical for reversible control. Systematic optimization of the reaction conditions allowed good control over the polymerization, leading to the formation of polymers with well-defined architectures, exemplified by the radical block copolymerization of macrocyclic allylic sulfides and vinyl monomers and the incorporation of sequence-defined segments into the polymer backbone. This work represents a significant step toward directly enabling the polymerizations of heteroatom-centered radical propagation to be regulated by existing reversible-deactivation radical polymerization techniques.     

Highly Recyclable and Tough Elastic Vitrimers from a Defined Polydimethylsiloxane Network

Despite intensive research on sustainable elastomers, achieving elastic vitrimers with significantly improved mechanical properties and recyclability remains a scientific challenge. Herein, inspired by the classical elasticity theory, we present a design principle for ultra-tough and highly recyclable elastic vitrimers with a defined network constructed by chemically crosslinking the pre-synthesized disulfide-containing polydimethylsiloxane (PDMS) chains with tetra-arm polyethylene glycol (PEG). The defined network is achieved by the reduced dangling short chains and the relatively uniform molecular weight of network strands. Such elastic vitrimers with the defined network, i.e., PDMS-disulfide-D, exhibit significantly improved mechanical performance than random analogous, previously reported PDMS vitrimers, and even commercial silicone-based thermosets. Moreover, unlike the vitrimers with random network that show obvious loss in mechanical properties after recycling, those with the defined network enable excellent thermal recyclability. The PDMS-disulfide-D also deliver comparable electrochemical signals if utilized as substrates for electromyography sensors after the recycling. The multiple relaxation processes are revealed via a unique physical approach. Multiple techniques are also applied to unravel the microscopic mechanism of the excellent mechanical performance and recyclability of such defined network.     

Photosynthesis of Benzonitriles on BiOBr Nanosheets Promoted by Vacancy Associates

Photocatalytic organic functionalization reactions represent a green, cost-effective, and sustainable synthesis route for value-added chemicals. However, heterogeneous photocatalysis is inefficient in directly activating ammonia molecules for the production of high-value-added nitrogenous organic products when compared with oxygen activation in the formation of related oxygenated compounds. In this study, we report the heterogeneous photosynthesis of benzonitriles by the ammoxidation of benzyl alcohols (99 % conversion, 93 % selectivity) promoted using BiOBr nanosheets with surface vacancy associates. In contrast, the main reaction of catalysts with other types of vacancy sites is the oxidation of benzyl alcohol to benzaldehyde or benzoic acid. Experimental measurements and theoretical calculations have demonstrated a specificity of vacancy type with respect to product selectivity, which arises from the adsorption and activation of NH₃ and O₂ that is required to promote subsequent C−N coupling and oxidation to nitrile. This study provides a better understanding of the role of vacancies as catalytic sites in heterogeneous photocatalysis.     

Stereoselective Synthesis of Enamides through Palladium-Catalyzed Oxidative Amidation of Conjugated Olefins with 2-Pyridones

A palladium-catalyzed oxidative amidation of conjugated olefin with 2-pyridone is described. A series of E-Enamides were synthesized in a highly stereocontrolled manner. The reaction also accommodates other cyclic and acyclic amides. Z-Enamides were predominantly prepared for primary amides probably due to the presence of an intramolecular hydrogen bond. Gram-scale synthesis of enamide and the following oxidative annulation with diphenylacetylene demonstrates the synthetic utility of this reaction.     

Development of a general separation strategy by countercurrent chromatography using sanshools from Zanthoxylum bungeanum oleoresin as a case study

Three kinds of sanshools were separated from Zanthoxylum bungeanum oleoresin by high-speed countercurrent chromatography. Sanshools are a series of amide compounds extracted from the Zanthoxylum bungeanum. Due to similar structures, polarities, and dissociation constants, it was challenging to select an appropriate solvent system for their complete separation by countercurrent chromatography. To address this challenge, a solvent-system-selection strategy was proposed to identify a relatively suitable solvent system. Additionally, a separation procedure incorporating multi-elution modes selection was established to separate similar compounds in a logical order. Ultimately, a solvent system comprising n-hexane:ethyl acetate:methanol:water in a ratio of 19:1:1:5.67 was selected. Three amide compounds with high purity were obtained through the use of recycling elution mode to improve separation resolution: hydroxy-ε-sanshool (8.4 mg; purity: 90.64%), hydroxy-α-sanshool (326.4 mg; purity: 98.96%), and hydroxy-β-sanshool (71.8 mg; purity: 98.26%) were obtained from 600 mg sanshool crude extract. The summarized solvent-system-selection strategy and separation procedure incorporating multi-elution modes may instruct countercurrent chromatography users, particularly novices, seeking to separate compounds with highly similar chemical properties.     

Separation and purification of quinolyridine alkaloids from seeds of Thermopsis lanceolata R. Br. by conventional and pH-zone-refining counter-current chromatography

In this work, the preparative separation of quinolyridine alkaloids from seeds of T. lanceolata by conventional and pH-zone-refining counter-current chromatography. Traditional counter-current chromatography separation was performed by a flow-rate changing strategy with a solvent system of ethyl acetate-n-butanol-water (1:9:10, v/v) and 200 mg sample loading. Meanwhile, the pH-zone-refining mode was adopted for separating 2.0 g crude alkaloid extracts with the chloroform-methanol-water (4:3:3, v/v) solvent system using the stationary and mobile phases of 40 mM hydrochloric acid and 10 mM triethylamine. Finally, six compounds, including N-formylcytisine (two conformers) ( 1 ), N-acetycytisine (two conformers) ( 2 ), (-)-cytisine ( 3 ), 13-β-hydroxylthermopsine ( 4 ), N-methylcytisine ( 5 ), and thermopsine ( 6 ) were successfully obtained in the two counter-current chromatography modes with the purities over 96.5%. Moreover, we adopted nuclear magnetic resonance and mass spectrometry for structural characterization. Based on the obtained findings, the pH-zone-refining mode was the efficient method to separate quinolyridine alkaloids relative to the traditional mode.     

Copolymerization of Carbonyl Sulfide and Propylene Oxide via a Heterogeneous Prussian Blue Analogue Catalyst with High Productivity and Selectivity

This study demonstrates the superiority of a stable and well-defined heterogeneous cobalt hexacyanocobaltate (Co₃[Co(CN)₆]₂), a typical cobalt Prussian Blue Analogue (CoCo-PBA) that catalyzes the copolymerization of carbonyl sulfide (COS) and propylene oxide (PO) to produce poly(propylene monothiocarbonate)s (PPMTC). The number-average molecular weights of the PPMTC were 66.4 to 139.4 kg/mol, with a polydispersity of 2.0–3.9. The catalyst productivity reached 1040 g polymer/g catalyst (12.0 h). The oxygen-sulfur exchange reaction (O/S ER), which would generate random thiocarbonate and carbonate units, was effectively suppressed, and thus the selectivity of the monothiocarbonate over carbonate linkages was up to >99%. It was shown that no cyclic thiocarbonate byproduct was produced during the heterogeneous catalysis of COS/PO copolymerization using CoCo-PBA as the catalyst. The content of monothiocarbonate and ether units in the copolymer chain could be regulated by tuning the feeding amount of COS.     

Modulating ion current rectification generating high energy output in a single glass conical nanopore channel by concentration gradient

Inspired by biological systems that have the inherent skill to generate considerable bioelectricity from the salt content in fluids with highly selective ion channels and pumps on cell membranes,herein,a fully abiotic,single glass conical nanopores energy-harvesting is demonstrated.Ion current rectification(ICR)in negatively charged glass conical nanopores is shown to be controlled by the electrolyte concentration gradient depending on the direction of ion diffusion.The degree of ICR is enhanced with the increasing forward concentration difference.An unusual rectification inversion is observed when the concentration gradient is reversely applied.The maximum power output with the individual nanopore approaches10~4pW.This facile and cost-efficient energy-harvesting system has the potential to power tiny biomedical devices or construct future clean-energy recovery plants.